FarragTech CARD G, Operating Manual

Page: 52 / 101

EXTENDED MODE
CARD G / FIT
50
V 6.15 E / April 2010
17.4 D
RYING
P
ARAMETERS
T
he D
RYING
P
ARAMETERS
are accessed from the M
AIN
S
CREEN
with the key . Important data to
define the drying process can be entered in this screen. This and all following input screens are
only available in E
XTENDED
M
ODE
operation.
All further input screens can be attained from the screen with the D
RYING
P
ARAMETERS
by using
the keys described in the lower part of the display.
Following parameters can be set in this menu:
SET Temperature
F
ACTORY
S
ETTING
: 60°C [140°F]
The material is dried with this temperature.
If desired, the allowed minimum and the maximum input value being entered can be changed in the
menu with the R
EGULATING
P
ARAMETERS
(see SYSTEMS MANUAL CARD G FIT).
CDOWN Timer
F
ACTORY
S
ETTING
: 0h 0m
When the drying hopper is filled the first time, the material must be pre-dried for a certain time. The
CDOWN (Countdown) T
IMER
informs the operator as soon as dried material can be removed.
The timer is to be set to the recommended drying time specified by the material supplier. As soon as the
drying process is activated and the temperature in the process circuit is reached within the alarm limits,
the CDOWN timer starts to expire. Once the CDOWN timer has elapsed, the dried material can be
supplied to the production process.
The time is to be set to 0h 0m if the CDOWN T
IMER
is not required.