FarragTech CARD G, Operating Manual

Page: 60 / 101

EXTENDED MODE
CARD G / FIT
58
V 6.15 E / April 2010
17.7 WEEKLY TIMER
17.7.1 WEEKLY TIMER GENERAL
T
he drying process can be activated and deactivated automatically by the weekly timer. The
T
IMER
M
ODE
must be set to AUTO to activate the weekly timer.
The switching times become visible as soon as the weekly timer is activated. One ON-time and
one OFF-time can be set per day.
The G
ENERAL
W
EEKLY
T
IMER
is accessed from the screen with the D
RYING
P
ARAMETERS
with the
key .
To avoid an ON-switching or an OFF-switching action on a certain day the appropriate time must
be set to 0:00, or the ON- and OFF-time must be set to the same value.
According to upper illustration, the following weekly timer program would take place:
On Monday at 8:00 a.m. the drying is started, and on Wednesday at 5:00 p.m. it is stopped again.
There is no switching action on Tuesday because both times are set to 0:00, and there is no OFF-
switching action on Monday because this value is also set to 0:00. The ON-time on Wednesday
shows 0:00 with no switching action, either.
The drying is activated again on Thursday at 9:30 a.m. and continues to work until 12:45 p.m. on
Saturday, because all prior switching times are set to 0:00.
On Sunday the drying remains deactivated, because ON- and OFF-time show the same value.