Fagor CNC 8055, Operating Manual

Page: 188 / 256

·188·
Operating manual
CNC 8055
CNC 8055i
10.
PLC
·T· M
ODEL
S
OFT
: V02.2
X
Lo
gic ana
lyzer
3. Information window
This window provides general information about the trace being shown at the time. It shows the
following data:

The "Trigger" shows the trigger condition defined by the user to draw the trace.

The "time base" indicates the time base defined by the user and used to show the current
trace.

The "Trace status" indicates the current status of the trace. The texts shown and their
meanings are:

The "cursor offset" indicates the distance from the cursor, vertical green line, to the trigger
position, vertical red line. It is given in milliseconds.

The "trigger type" indicates the type of trigger currently selected. The texts shown and their
meanings are:
4. Editing window.
It is the CNC's standard editing window. It is used for all the processes that require data entry.
5. Message window.
This CNC uses this window to show a warning or error message.
Empty There is no calculated trace.
Capturing There is a trace in progress.
Complete There is a trace stored.
D e f i n e t h r e a d w i t h
feedrate and turning
speed. The trigger is positioned at the beginning of the trace.
Define the thread with
p i t c h a n d t u r n i n g
speed. The trigger is positioned at the end of the trace.
Center The trigger is positioned in the middle of the trace.
Default When no trigger condition has been specified.