Fagor CNC 8055 Operating Manual Download Page 13

Page: 13 / 256

CNC 8055

CNC 8055i

·9·

Versio

n history

Software V02.03

July 2014

Software V02.10

November 2014

Software V02.21

July 2015

Software V02.22

March 2016

List of features

Manual

Set PAGE and SYMBOL instructions support PNG and JPG/JPEG formats.

PRG

New values for parameters MAXGEAR1..4 (P2..5), SLIMIT (P66), MAXSPEED (P0) and
DFORMAT (P1).

INST

List of features

Manual

Incremental zero offset (G158).

INST / PRG

Programs identified with letters.

OPT

Variables PRGN and EXECLEV.

INST

Korean language.

INST

Change of default value for general machine parameters: MAINOFFS (P107), MAINTASF (P162)
and FEEDTYPE (P170).

INST

New variable EXTORG.

INST / PRG

Image handling via DNC.

PRG

Save/restore a trace of the oscilloscope.

OPT

List of features

Manual

PLC library.

INST

Zero offsets table in ISO mode.

OPT

Compensation of the elastic deformation in the coupling of an axis.

INST

Machine axis parameter DYNDEFRQ (P103).

INST

Change of maximum value of axis and spindle parameter NPULSES.

INST

List of features

Manual

Axis filters for movements with the handwheel. General machine parameter HDIFFBAC (P129)
and machine axis parameter HANFREQ (P104).

INST

Change of maximum value of axis and spindle parameter NPULSES.

INST

Summary of Contents for CNC 8055

































































































































































































































































Search results

Summary of Contents for CNC 8055

Reviews:

Related manuals for CNC 8055

Brands by name

Popular brands

Fagor CNC 8055, Operating Manual

Search results

Summary of Contents for CNC 8055

Reviews:

Related manuals for CNC 8055

Brands by name

Popular brands