Fagor CNC 8055, Operating Manual

Page: 26 / 256

·26·
Operating manual
CNC 8055
CNC 8055i
1.
OVERVIEW
·T· M
ODEL
S
OFT
: V02.2
X
Part programs
1.1 Part programs
Part programs may be identified with up to 24 characters that may be letters and numbers. Blank
spaces can also be used.
It is NOT case sensitive. Identifying a program as "PROGRAM1", will be the same as identifying
it as "program1".
A program name cannot have only blank spaces. The "ñ" letter is not allowed.
The following special characters are allowed:
The following programs are identified with 6 digits:
• The special programs like OEM programs that are created by Fagor (999997, 999998, etc).
• Programs referred to in the general machine parameters (USERPDLY, USEREDIT, USERMAN,
USERDIAG, CFGFILE, MSGFILE, STPFILE, ISOSIMUL).
• The programs where the black box is saved as well as the SERCOS and CAN logs.
• The program that keeps the log of the communication open via serial line and the CAN servo log.
• The programs for the cycles of the MC/TC mode.
• The profile programs that are used in the cycles.
Compatibilities with versions prior to V02.1x
If there are programs identified by letters and a version older than V02.1x is installed, these programs
will not appear on the list, but they will still be in memory. When installing a version V02.1x, the
programs with letters will appear on the list.
There are two kinds of programs when it comes to keep compatibility with older versions:
1. Programs that have 6 digits and are equal to or smaller than 999999 and plc-error programs,
plc-message programs and plc programs.
2. Programs that have a number with more than 6 digits or programs with letters.
This way, users who do not wish to use the letter method to identify programs can keep using just
the 6-digit numbers.
Programs identified with numbers must have 6 digits.
Example: Program "17.pim" would be wrong.
Program "000017.pim" would be right.
! # $ % & ( ) + -
; = @ [ ] _ {
|
}
In software versions prior to V02.1x, only those part programs are recognized that are identified by
numbers.
We recommend doing a backup of the program that are in user memory before installing version
V02.1x.