64
range, click
Deactivate bearing for all measurements of following time
range
and select the time range.
Click on
OK
.
Show and edit bearing information
Click on the desired bearing and
then click
.
This displays the bearing information in the bearing database.
Edit the
Speed correction factor (SPF)
and select
Fixed outer race
optionally.
The kinematic frequencies can only be changed in the bearing database.
Click on
OK
.
Additional kinematic frequencies for analysis
In this section you can define additional kinematic frequencies for analysis.
These are also displayed in the evaluation diagram in the FIS Viewer.
Add kinematic frequency
Click on
.
Enter the
Name
, the
Speed correction factor (SPF)
and the
Normalized
frequency
.
Click on
OK
.
The additional kinematic frequency will be added.
Delete kinematic frequency
Select the kinematic frequency to delete.
Click on
and
click on
Yes
.
Edit kinematic frequency
Select the kinematic frequency from list.