Extreme Networks Summit WM3000 Series Reference Manual Download Page 89

Page: 89 / 513

Summit WM3000 Series Controller System Reference Guide

Adding an IP Address for a DNS Server

Add an IP address for a new domain server using the

Add

screen.

Click the

Add

button within the Domain Network System screen.

The new

Configuration

screen displays enabling you to add IP address for the DNS Server.

Enter the

Server IP Address

to define the IP address of the new static domain name server.

Refer to the

Status

field for the current state of the requests made from applet. This field displays

error messages if something goes wrong in the transaction between the applet and the controller.

Click

to use the changes to the running configuration and close the dialog.

Click

Cancel

to close the dialog without committing updates to the running configuration.

Configuring Global Settings

Use the

Global Settings

screen to query domain name servers to resolve domain names to IP addresses.

Use this screen to enable/disable the

Domain look up

, which allows you to use commands like ping,

traceroute etc. using hostnames rather than IP addresses.

Click the

Global Settings

button in the main Domain Network System screen.

Configuration

screen displays for editing the DNS settings of the server.

Select the

Domain Look Up

checkbox to enable the controller to query domain name servers to resolve

domain names to IP addresses.

Summary of Contents for Summit WM3000 Series


































































































































































































































































































































































































































































































































Search results

Summary of Contents for Summit WM3000 Series

Reviews:

Related manuals for Summit WM3000 Series

Brands by name

Popular brands

Extreme Networks Summit WM3000 Series, Reference Manual

Search results

Summary of Contents for Summit WM3000 Series

Reviews:

Related manuals for Summit WM3000 Series

Brands by name

Popular brands