Extreme Networks Summit WM3000 Series Reference Manual Download Page 60 | Manualshive

Page: 60 / 513

background image

Controller Information

Summit WM3000 Series Controller System Reference Guide

60

4

The

Status

is the current state of the requests made from the applet. Requests are any “SET/GET”

operation from the applet. The Status field displays error messages if something goes wrong in the
transaction between the applet and the controller.

5

Click on the

Refresh

button to refresh the port statistics.

6

Click on the

Close

button to exit out of the screen.

Viewing the Port Statistics Graph

The controller continuously collects data for port statistics. Even when the port statistics graph is closed,
data is still tallied. Periodically display the port statistics graph for assessing the latest information.

To view a detailed graph for a port:

1

Select a port from the table displayed in the Statistics screen.

2

Click the

Graph

button.

The

Interface Statistics

screen displays

for the selected port. The screen provides the option to view

the following:

Output NonUnicast

Packets

Displays the number of unicast packets transmitted from the interface.

Output Total Packets

Displays the total number of packets transmitted from the interface.

Output Packets

Dropped

Displays the number of transmitted packets dropped from the interface.

Output Packets Dropped are packets dropped when the output queue of

the device associated with the interface is saturated.

Output Packets Error

Displays the number of transmitted packets with errors. Output Packet

Errors are the sum of all the output packet errors, malformed packets and

misaligned packets received.

«
...
58
59
60
61
62
...
»

Summary of Contents for Summit WM3000 Series


































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Summit WM3000 Series

Brand: Ebyte Pages: 34

Brand: XVision Pages: 28

Brand: YASKAWA Pages: 61

Brand: Tapeswitch Pages: 13

Brand: Baby Trend Pages: 8

Brand: Baby Trend Pages: 19

Brand: Baby Trend Pages: 5

Brand: Baby Trend Pages: 4

Brand: Hama Pages: 17

Brand: Quectel Pages: 95

Brand: ICAS Pages: 51

Brand: Icar Pages: 40

Brand: Icar Pages: 86

Brand: Icar Pages: 39

Brand: IBP Pages: 12

Brand: Parker Pages: 54

Brand: RAM Pages: 71

Brand: LLURIA Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands