Summit WM3000 Series Controller System Reference Guide
287
Defining the Layer 3 Peer List
The Layer 3 Peer List contains the IP addresses MUs are using to roam amongst various subnets. This
screen is helpful in displaying the IP addresses available to those MUs requiring access to different
subnet resources.
To define the Layer 3 Peer List:
1
Select
Services
>
Layer 3 Mobility
from the main menu tree.
The
Layer 3 Mobility
screen appears with the Configuration tab displayed.
2
Select the
Peer List
tab.
3
Refer to the contents of the Peer List for existing IP addresses and Layer 3 MU session status.
Use this information to determine whether a new IP address needs to be added to the list or an
existing address needs to be removed.
4
Select an IP address from those displayed and click the
Delete
button to remove the address from the
list available for MU Layer 3 roaming amongst subnets.
5
Click the
Add
button to display a screen used for adding the IP address to the list of addresses
available for MU Layer 3 roaming.
Summary of Contents for Summit WM3000 Series
