Extreme Networks Summit WM3000 Series Reference Manual Download Page 98 | Manualshive

Page: 98 / 513

background image

Network Setup

Summit WM3000 Series Controller System Reference Guide

98

3

Highlight an existing VLAN and click the

Edit

button. The system displays a Port VLAN Change

Warning message. Be advised, changing VLAN designations could disrupt access to the controller.

4

Click

OK

to continue. A new window displays wherein the VLAN assignments can be modified for

the selected VLAN.

NOTE

The ports available vary by controller.
On the Summit WM3600, the available ports are ge1, ge2, ge3, ge4, ge5, ge6, ge7, ge8 and up1.
On the Summit WM3700, the available ports are ge1, ge2, ge3 and ge4.

5

Change VLAN port designations as required.

6

Click

OK

to use the changes to the running configuration and close the dialog.

7

Click

Cancel

to close the dialog without committing updates to the running configuration.

«
...
96
97
98
99
100
...
»

Summary of Contents for Summit WM3000 Series


































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Summit WM3000 Series

Brand: Vacon Pages: 62

Brand: Warner Electric Pages: 3

Brand: iCeeO2 Pages: 7

Brand: SABAF Pages: 6

Brand: Samson Pages: 92

Brand: Jafar Pages: 10

Brand: Jafar Pages: 9

Brand: Samsung Pages: 6

Brand: Samsung Pages: 32

EtherNetIP ControlPlex CPC12EN

Brand: E-T-A Pages: 28

Compact Comfort VAV12

Brand: SAI HVAC Pages: 16

Brand: Saitek Pages: 15

Brand: saia-burgess Pages: 203

Brand: Sailor Pages: 1

EP Series Pro-Bloc

Brand: Parker Pages: 11

Brand: Parker Pages: 22

Brand: Parker Pages: 2

Frigolink FVB110B

Brand: WURM Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands