Extreme Networks Summit WM3000 Series Reference Manual Download Page 64 | Manualshive

Page: 64 / 513

background image

Controller Information

Summit WM3000 Series Controller System Reference Guide

64

6

Click

OK

to save and add the changes to the running configuration and close the dialog.

Viewing Controller Configurations

Use the

Configurations

screen to review the configuration files available to the controller. The details of

each configuration can be viewed individually. Optionally, edit the file to modify its name or use the file
as the controller startup configuration. A file can be deleted from the list of available configurations or
transferred to a user specified location.

NOTE

To view the entire controller configuration using SNMP, the controller CLI provides a better medium to review the
entire controller configuration.

NOTE

The Extreme Networks Wireless LAN Controller Management Software (WMS) is a recommended utility to plan the
deployment of the controller and view its configuration once operational in the field. Extreme Networks WMS can
help optimize the positioning and configuration of a controller (and its associated radios) in respect to a WLAN’s MU
throughput requirements and can help detect rogue devices. For more information, refer to the Extreme Networks
Web site.

To view the Configuration files available to the controller:

«
...
62
63
64
65
66
...
»

Summary of Contents for Summit WM3000 Series


































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Summit WM3000 Series

Brand: Bartlett Pages: 30

Brand: Daikin Pages: 5

Brand: H3C Pages: 69

Brand: fakro Pages: 16

Brand: e-BLEACH Pages: 24

Brand: Hanwell Pages: 34

Brand: HANSONG Pages: 11

Brand: Datapath Pages: 12

Brand: Hansen Pages: 4

Brand: Nedap Pages: 20

CEmarking RCX221

Brand: Yamaha Pages: 468

Brand: GI.BI.DI Pages: 60

DuoControl Signal 111

Brand: Tormatic Pages: 3

Brand: K&K Pages: 10

Brand: Ashly Pages: 1

Brand: OneFex Pages: 24

Brand: Lampert Pages: 15

Brand: Oriental motor Pages: 52

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands