manualshive.com logo in svg

Extreme Networks Summit WM3000 Series, Reference Manual

Looking for a comprehensive Reference Manual for your Extreme Networks Summit WM3000 Series product? Look no further! Download the user manual for free from manualshive.com, providing you with detailed instructions, insights, and troubleshooting tips to make the most of your cutting-edge networking solution.

Share
Download
background image

Diagnostics

Summit WM3000 Series Controller System Reference Guide

474

Modifying the Configuration of an Existing Ping Test

The properties of an existing ping tests can be modified to ping an existing (known) device whose 
network address attributes may have changed and require modification to connect (ping) to it.

To modify the attributes of an existing ping test:

1

Select 

Diagnostics

 >

 Ping 

from the main menu.

2

Highlight an existing ping test within the Configuration tab and select the 

Edit

 button.

3

Modify the following information (as needed) to edit the existing ping test: 

4

Click 

OK

 to save and add the changes to the running configuration and close the dialog.

5

Refer to the 

Status

 field for the current state of the requests made from applet. This field displays 

error messages if something goes wrong in the transaction between the applet and the controller.

Description 

If necessary, modify the description for the ping test. Ensure this 

description is representative of the test, as this is the description 

displaying within the Configuration tab.

Destination IP

If necessary, modify the IP address of the target device. This is the 

numeric (non DNS address) destination for the device transmitted the 

ping packets.

No. of Probes

If necessary, modify the number of packets transmitted to the target IP 

address to discern the round trip time between the controller and its 

connected device.

Timeout(sec)

If necessary, modify the timeout value (in seconds) used to timeout the 

ping test if a round trip packet is not received by the controller from its 

target device. Ensure this interval is long enough to account for network 

congestion between the controller and its target device.

Frequency

If necessary, modify the interval (in seconds) between ping packet 

transmissions. Define a longer interval if high levels of network congestion 

are anticipated between the controller and its target device. Use a value 

of 0 to execute a single ping or stop a currently executing ping test.

Summary of Contents for Summit WM3000 Series


































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Summit WM3000 Series

Waterway OASIS Instruction Manual preview
OASIS
Brand: Waterway Pages: 16
Mamas & Papas Tempo Manual preview
Tempo
Brand: Mamas & Papas Pages: 16
FATEK FBs-1HLC Operation Manuals preview
FBs-1HLC
Brand: FATEK Pages: 10
YUGE LCC Series Hardware Manual preview
LCC Series
Brand: YUGE Pages: 69
Quectel EC25 series Command Manual preview
EC25 series
Brand: Quectel Pages: 232
Quectel L76 Reference Design preview
L76
Brand: Quectel Pages: 9
Quectel BC26 Manual preview
BC26
Brand: Quectel Pages: 73
WAREMA Wisotronic Operating Instructions Manual preview
Wisotronic
Brand: WAREMA Pages: 112
WAGO 750-880 Manual preview
750-880
Brand: WAGO Pages: 414
V2 Blitz Manual preview
Blitz
Brand: V2 Pages: 48
KROHNE OPTISWITCH 5100 C Manual preview
OPTISWITCH 5100 C
Brand: KROHNE Pages: 40
Beckhoff CX2550 Series Manual preview
CX2550 Series
Brand: Beckhoff Pages: 30
Festo CPS-Gate Operating Instructions Manual preview
CPS-Gate
Brand: Festo Pages: 109
Topworx Valvetop DXP Installation, Operation & Maintenance Manual preview
Valvetop DXP
Brand: Topworx Pages: 8
Baby Trend TJ68 Instruction Manual preview
TJ68
Brand: Baby Trend Pages: 22
D+H RZN 4304 Instructions For Use Manual preview
RZN 4304
Brand: D+H Pages: 12
NKK SWITCHES IS-CHPMP Manual preview
IS-CHPMP
Brand: NKK SWITCHES Pages: 10
Universal Remote Control total control MRX-10 Owner'S Manual preview
total control MRX-10
Brand: Universal Remote Control Pages: 16

Brands by name

Popular brands

Load more brands