Extreme Networks Summit WM3000 Series Reference Manual Download Page 148

Page: 148 / 513

Network Setup

Summit WM3000 Series Controller System Reference Guide

148

Refer to the

Traffic

field for the following information (both received and transmitted):

Refer to the

RF Status

field for the following information:

Refer to the

Errors

field for the following information:

VLAN

Displays the name of the VLAN the WLAN is associated with.

Num Associated MUs

Displays the total number of MUs currently associated with the selected

WLAN.

Authentication Type

Displays the authentication method deployed on the WLAN.

Encryption Type

Displays the encryption type deployed on the selected WLAN.

Adopted Radios

Displays the radios adopted by the selected WLAN.

Pkts per second

Displays the average total packets per second that cross the selected

WLAN. The Rx column displays the average total packets per second

received on the selected WLAN. The Tx column displays the average total

packets per second sent on the selected WLAN. The number in black

represents this statistic for the last 30 seconds and the number in blue

represents this statistic for the last hour.

Throughput

Displays the average throughput in Mbps on the selected WLAN. The Rx

column displays the average throughput in Mbps for packets received on

the selected WLAN. The Tx column displays the average throughput for

packets sent on the selected WLAN. The number in black represents this

statistic for the last 30 seconds and the number in blue represents this

statistic for the last hour.

Avg Bit Speed

Displays the average bit speed in Mbps on the selected WLAN. This

includes all packets sent and received. The number in black represents

this statistic for the last 30 seconds and the number in blue represents

this statistic for the last hour.

Non-unicast Pkts

Displays the percentage of the total packets for the selected WLAN that

are non-unicast. Non-unicast packets include broadcast and multicast

packets. The number in black represents this statistic for the last 30

seconds and the number in blue represents this statistic for the last hour.

Avg MU Signal

Displays the average RF signal strength in dBm for all MUs associated

with the selected WLAN. The number in black represents this statistic for

the last 30 seconds and the number in blue represents this statistic for

the last hour.

Avg MU Noise

Displays the average RF noise for all MUs associated with the selected

WLAN. The number in black represents this statistic for the last 30

seconds and the number in blue represents this statistic for the last hour.

Avg MU SNR

Displays the average

Signal to Noise Ratio

(SNR) for all MUs associated

with the selected WLAN. The Signal to Noise Ratio is an indication of

overall RF performance on your wireless network.

Average Number of

Retries

Displays the average number of retries for all MUs associated with the

selected WLAN. The number in black represents this statistic for the last

30 seconds and the number in blue represents this statistic for the last

hour.

% Gave Up Pkts

Displays the percentage of packets the controller gave up on for all MUs

associated with the selected WLAN. The number in black represents this

statistic for the last 30 seconds and the number in blue represents this

statistic for the last hour.

% Non-decryptable

Pkts

Displays the percentage of undecryptable packets for all MUs associated

with the selected WLAN. The number in black represents this statistic for

the last 30 seconds and the number in blue represents this statistic for

the last hour.

Summary of Contents for Summit WM3000 Series


































































































































































































































































































































































































































































































































Search results

Summary of Contents for Summit WM3000 Series

Reviews:

Related manuals for Summit WM3000 Series

Brands by name

Popular brands

Extreme Networks Summit WM3000 Series, Reference Manual

Search results

Summary of Contents for Summit WM3000 Series

Reviews:

Related manuals for Summit WM3000 Series

Brands by name

Popular brands