Controller Security
Summit WM3000 Series Controller System Reference Guide
316
4
The
Number of Approved APs
is simply the sum of all of approved Access Point MAC Addresses
detected.
5
Click on the
Export
button to export the contents of the table to a Comma Separated Values file
(CSV).
Unapproved APs (Reported by APs)
Use the
Unapproved APs (Reported by APs)
tab to review Access Points detected by associated controller
Access Point radios and are restricted from operation within the controller managed network. The
criteria for restriction was defined using the
Security > Access Point Detection > Configuration
screen.
To view Access Point detected unapproved Access Points:
1
Select
Security
>
Access Point Detection
from the main menu tree.
2
Click on the
Unapproved APs (Reported by APs)
tab.
3
The
Unapproved APs (Reported by APs)
table displays the following information:
BSS MAC Address
Displays the MAC Address of each Unapproved AP. These MAC addresses
are Access Points observed on the network, but have yet to be added to
the list of Approved APs, and are therefore interpreted as a threat on the
network.
If a MAC Address displays on the list incorrectly, click the
Allow
button
and add the MAC Address of a newly Allowed AP index.
Reporting Radio
Displays the numerical value for the radio used with the detecting AP.
Summary of Contents for Summit WM3000 Series
