Extreme Networks Summit WM3000 Series Reference Manual Download Page 83

Page: 83 / 513

Summit WM3000 Series Controller System Reference Guide

Click

Close

exit the dialog.

Viewing Controller Licenses

Use the

Licenses

screen to install and add a new controller license.

To install a new license:

Select

Controller

Licenses

from the main menu tree.

Refer to the

Install License

field for the following information:

Description

Displays the details of the alarm log event. This information can be used

in conjunction with the

Solution

and

Possible Causes

items to

troubleshoot the event and determine how the event can be avoided in

the future.

Solution

Displays a possible solution to the alarm event. The solution should be

attempted first to rectify the described problem.

Possible Causes

Describes the probable causes that could have raised this specific alarm.

Determine whether the causes listed can be remedied to avoid this alarm

from being raised in the future.

Alarm Message

Displays the radio (and MAC address if relevant) reporting the alarm

detail information.

Summary of Contents for Summit WM3000 Series


































































































































































































































































































































































































































































































































Search results

Summary of Contents for Summit WM3000 Series

Reviews:

Related manuals for Summit WM3000 Series

Brands by name

Popular brands

Extreme Networks Summit WM3000 Series, Reference Manual

Search results

Summary of Contents for Summit WM3000 Series

Reviews:

Related manuals for Summit WM3000 Series

Brands by name

Popular brands