Summit WM3000 Series Controller System Reference Guide
187
4
Click the
Clear all rates
button to uncheck all of the Basic and Supported rates.
5
Refer to the
Status
field for the current state of the requests made from applet. This field displays
error messages if something goes wrong in the transaction between the applet and the controller.
6
Click
OK
to use the changes to the running configuration and close the dialog.
7
Click
Cancel
to close the dialog without committing updates to the running configuration.
Adding APs
The
Add Radio
screen provides a facility for creating a new (unique) radio index for inclusion within the
Configuration screen. Use the Add screen to add the new radio’s MAC address and define its radio
type.
To add a Radio to the controller:
1
Select
Network
>
Access Point Radios
from the main menu.
2
Click the
Configuration
tab.
3
Click the
Add
button to display at screen containing settings for adding a radio
NOTE
Once an AP has been added to a controller, its country setting can be changed, if the controller's country setting
does not want to be used. Use the Network > Access Point > Configuration screen to select and modify the
configuration of APs after adoption.
4
Enter the device
AP
MAC Address
(the physical MAC address of the radio). Ensure this address is the
actual hard-coded MAC address of the device.
5
Use the
AP Type
drop-down menu to define the radio type you would like to add.
Summary of Contents for Summit WM3000 Series
