Extreme Networks Summit WM3000 Series Reference Manual Download Page 459

Page: 459 / 513

Summit WM3000 Series Controller System Reference Guide

459

Click the

Apply

button to commit and apply the changes.

Click the

Revert b

utton to revert back to the last saved configuration.

Controller Disk Allocation

The

Disk

tab contains parameters related to the various disk partitions on the controller. It also displays

available space in the external drives (compact flash etc).

Select

Diagnostics

from the main tree menu.

Select the

Disk

tab.

This

Disk

tab displays the status of the controller flash, nvram and system disk resources. Each field

displays the following:

●

Free Space Limit

●

Free INodes

●

Free INode Limit

Define the

Free Space Limit

variable carefully, as disk space may be required during periods of high

bandwidth traffic and file transfers.

Click the

Apply

button to commit and apply the changes.

Click the

Revert

button to revert back to the last saved configuration.

Name

The name of the buffer.

Usage

Buffers current usage

Limit

The buffer limit.

Summary of Contents for Summit WM3000 Series


































































































































































































































































































































































































































































































































Search results

Summary of Contents for Summit WM3000 Series

Reviews:

Related manuals for Summit WM3000 Series

Brands by name

Popular brands

Extreme Networks Summit WM3000 Series, Reference Manual

Search results

Summary of Contents for Summit WM3000 Series

Reviews:

Related manuals for Summit WM3000 Series

Brands by name

Popular brands