Extreme Networks Summit WM3000 Series, Reference Manual

Page: 451 / 513

Summit WM3000 Series Controller System Reference Guide
451
4 Modify the following Radius Server attributes as necessary:
5 Refer to the Status field for the current state of the requests made from applet. This field displays
error messages if something goes wrong in the transaction between the applet and the controller.
6 Click on OK to complete the modification of the Radius Server.
7 Click Cancel to revert back to the last saved configuration without saving any of your changes.
Radius Server Index
Displays the read-only numerical Index value for the Radius Server to
help distinguish this server from other servers with a similar configuration
(if necessary). This is not an editable value.
Radius Server IP
Address
Modify the IP address of the external Radius Server (if necessary). Ensure
this address is a valid IP address and not a DNS name.
Radius Server Port
Change the TCP/IP port number for the Radius Server (if necessary). The
port range available for assignment is from 1 - 65535.
Number of retries to
communicate with
Radius Server
Revise (if necessary) the maximum number of times the controller
retransmits a Radius Server frame before it times out of the
authentication session. The available range is between 0 - 100.
Time to wait for
Radius Server to
reply
Revise (if necessary) the maximum time (in seconds) the controller waits
for the Radius Server’s acknowledgment of authentication request packets
before the controller times out of the session. The configurable range is
between 1 - 1000 seconds.
Encryption key
shared with Radius
Server
Enter the encryption key the controller and Radius Server share and must
validate before the user authentication scheme provided by the Radius
Server can be initiated.