Extreme Networks Summit WM3000 Series Reference Manual Download Page 337

Page: 337 / 513

Summit WM3000 Series Controller System Reference Guide

337

Sequence Number

Enter a sequence number to be associated with each role. Sequence

numbers determine the order that role are applied. Roles with lower

sequence numbers are applied before those with higher sequence

numbers. Sequence numbers are assigned when a role is created and

cannot be edited.

Role Name

Enter a name for each role. The role name is configured when the role is

created and cannot be edited.

AP Location

Select an AP Location filter, if any, to apply to the role.
Available AP Location filters are:
•

Exact

: The role will only be applied to APs with the exact location

string specified in the role

•

Contains

: The role will be applied to APs whose location contains the

location string specified in the role

•

Not Contains

: The role will be applied to APs whose location does not

contain the location string specified in the role

•

Any

: The role will be applied to any AP Locations

ESSID

Select an ESSID filter, if any, to apply to the role.
Available ESSID filters are:
•

Exact

: The role will only be applied when the exact ESSID string

specified in the role

•

Contains

: The role will be applied when the ESSID contains the string

specified in the role

•

Not Contains

: The role will be applied when the ESSID does not

contain the string specified in the role

•

Any

: The role is applied to any ESSID

Group Name

Select a Group Name filter, if any, to apply to the role.
Available Group Name filters are:
•

Exact

: The role will only be applied when the exact Radius Group

Name string specified in the role

•

Contains

: The role will be applied when the Radius Group Name

contains the string specified in the role

•

Not Contains

: The role will be applied to when the Radius Group

Name does not contain the string specified in the role

•

Any

: The role will be applied to any Radius Group Name

MU MAC Address

Configure the MU MAC Address filters, if any, applied to each role. The

MU MAC Address filter can be set to apply the role to any MU MAC

Address or a specific MU MAC Address or a MU MAC Mask.

Authentication

Select an Authentication filter, if any, to apply to the role.
Available Authentication filters are:
•

Equals

: The role will only be applied when the Authentication type

matches the exact Authentication method specified in the role

•

Not Equals

: The role will only be applied when the Authentication type

does not match the exact Authentication method specified in the role

•

Any

: The role will be applied to any Authentication type

Summary of Contents for Summit WM3000 Series


































































































































































































































































































































































































































































































































Search results

Summary of Contents for Summit WM3000 Series

Reviews:

Related manuals for Summit WM3000 Series

Brands by name

Popular brands

Extreme Networks Summit WM3000 Series, Reference Manual

Search results

Summary of Contents for Summit WM3000 Series

Reviews:

Related manuals for Summit WM3000 Series

Brands by name

Popular brands