Extreme Networks Summit WM3000 Series Reference Manual Download Page 346

Page: 346 / 513

Controller Security

Summit WM3000 Series Controller System Reference Guide

346

Refer to the

Status

field for the state of the requests made from applet. This field displays error

messages if something goes wrong in the transaction between the applet and the controller.

Click

to use the changes to the running configuration and close the dialog.

Click

Cancel

to close the dialog without committing updates to the running configuration.

Configuring WLAN Firewall Rules

To review WLAN firewall rules:

Select

Security

Wireless Firewall

from the main tree menu.

Click the

Configuration

tab.

Click the

WLAN

tab.

The

WLAN

tab contains the following information:

Broadcast Storm

Threshold

Configure the Broadcast Storm Threshold for each interface. When the

rate of broadcast packets exceeds the high threshold configured for an

interface, packets are throttled till the rate falls below the configured

rate. Thresholds are configured in terms of packets per second. The

threshold range is 1-1000000 packets per second.

Multicast Storm

Threshold

Configure the Multicast Storm Threshold for each interface. When the

rate of multicast packets exceeds the high threshold configured for an

interface, packets are throttled till the rate falls below the configured

rate. Thresholds are configured in terms of packets per second. The

threshold range is 1-1000000 packets per second.

Unknown Unicast

Storm

Configure the Unknown Unicast Storm Threshold for each interface. When

the rate of unknown unicast packets exceeds the high threshold

configured for an interface, packets are throttled till the rate falls below

the configured rate. Thresholds are configured in terms of packets per

second. The threshold range is 1-1000000 packets per second.

Summary of Contents for Summit WM3000 Series


































































































































































































































































































































































































































































































































Search results

Summary of Contents for Summit WM3000 Series

Reviews:

Related manuals for Summit WM3000 Series

Brands by name

Popular brands

Extreme Networks Summit WM3000 Series, Reference Manual

Search results

Summary of Contents for Summit WM3000 Series

Reviews:

Related manuals for Summit WM3000 Series

Brands by name

Popular brands