O
CTOBER
2002
E
XABYTE
VXA-2 A
UTO
P
AK1x7
A
UTOLOADER
31
S
ETTING
C
ONFIGURATION
O
PTIONS
Disabling Security From the LCD
1.
1.
1.
1.
From the Status screen, press
[MENU]
. The following screen appears:
Note:
If the menu displays
Disabled
, the security option is already
disabled. If the menu displays
LCD PW
, security was enabled using the
LCD as described in the following steps. If the menu displays
SCSI
,
security was enabled by your application using a SCSI command. If a
SCSI command was used to enable security, it must be used to disable
security. Refer to your software documentation for instructions.
2.
2.
2.
2.
Press
[ENTER]
to enter the Security Menu. The following message flashes on
the screen:
Enter password and press ENTER to disable security or
ESCAPE to cancel
Then, the following screen appears:
3.
3.
3.
3.
Enter the three-digit password you selected when you set security. Press
[
1
]
or
[
2
]
to move the screen arrow under the digit in the password that you
want to change and
[
3
]
or
[
4
]
to change the numbers. (The default password
is 000.) When you are finished, press
[ENTER]
. The following screen appears:
If you enter the wrong password, the system displays an error message.
Note:
If you forget the password, try entering the default password (000). If
the password has been changed from the default and you do not know
what it is, see
for instructions about how to view the LCD
password.
!
S e c u r t y
L C D P W
P W ?
0 0 0
←
↕
→
!
S e c u r t y
D i s a b l e d