Exabyte 221L, Product Manual

Page: 74 / 208

58
P
RODUCT
M
ANUAL
1014258
C
HAPTER
4—O
PERATING THE
L
IBRARY
To remove and add cartridges through the entry/exit port:
1.
1. 1.
1. If the security option has been enabled, disable it (see page 50 ).
2.
2. 2.
2. Change the control mode to LCD (see page 54 ).
3.
3. 3.
3. Use the Move Cartridge command to move a cartridge from one of the
storage slots to the entry/exit port. For instructions on using the Move
Cartridge command, see page 71 . For the element numbering scheme, see
page 69 . The entry/exit port is element number 81.
4. 4. 4. 4. Press
[MENU]
to display the menus, then press the up arrow until “Unlock
Entry/Exit Port” appears. Press
[ENTER]
to unlock the entry/exit port.
5. 5. 5. 5. Rotate the entry/exit port door, from left to right, as shown in Figure 4-4 .
6. 6. 6. 6. Press the top and bottom buttons to release the entry/exit port caddy, then
pull it out, as shown in Figure 4-5 .
U n l o c k
E n t r y / E x i t P o r t
Figure 4-4 Opening the entry/exit port door