Exabyte 221L, Product Manual

Page: 71 / 208

A
UGUST
2005 E
XABYTE
221L
AND
221L-FC L
IBRARIES 55
O
PENING AND
C
LOSING THE
L
IBRARY
’
S
D
OOR
To change the robot control mode:
1.
1. 1.
1. If the security option has been enabled, disable it (see page 50 ).
2.
2. 2.
2. Press
[MENU]
to display the menus, then press the down arrow until “Robot
Mode” appears. The Robot Mode screen shows the current mode.
3.
3. 3.
3. Press
[ENTER]
. An informational message appears, then the following screen
appears.
4.
4. 4.
4. Use the arrow keys to select the desired mode and press
[ENTER]
. The screen
shows the new selection.
O
PENING AND
C
LOSING THE
L
IBRARY
’
S
D
OOR
You can access the cartridges and tape drive(s) by opening the library’s door.
Opening the Door
To open the library’s door:
1. 1. 1. 1. If the security option has been enabled, disable it (see page 50 ).
2. 2. 2. 2. Press the
[UNLOCK{DOOR]
button. At the Unlock Door prompt, press
[ENTER]
.
3. 3. 3. 3. Wait while the robot moves to the park position (at the far right).
R o b o t M o d e
S C S I
R o b o t M o d e ?
S C S I
↕
! ! ! !
Important
Avoid opening the library’s door to replace individual cartridges
during library operation. Opening and closing the door interrupts
operation and causes the library to perform a cartridge inventory.
Instead, use the library’s entry/exit port as described on page 57 .
Caution
Do not force the door open. The door’s interlock mechanism may be prevented
from releasing by LCD security or by the application software.