Exabyte 221L, Product Manual

Page: 137 / 208

A
UGUST
2005 E
XABYTE
221L
AND
221L-FC L
IBRARIES 121
V
IEWING
I
NTERFACE
, L
IBRARY
,
AND
T
APE
D
RIVE
I
NFORMATION
Viewing the Library History
The Library History page lists the most recent 600 events that have occurred in
the library.
To view the library history:
1.
1. 1.
1. Click on Info at the top of the page.
2.
2. 2.
2. Click on Library information.
T (Type) Indicates the type of element:
s = cartridge slot
d = tape drive
e = entry/exit port
r = robot
A (Accessible) The tape drive is accessible (1) or not (0). The tape drive is accessible if it is
installed in the drive bay and there is no cartridge loaded inside the drive.
Note: This field applies only to tape drives. For all other elements, the value is 0.
Label If the element contains a cartridge whose bar code label has been scanned, the
Label field contains the bar code label contents.
Label Valid The Label field is valid (1) or not (0).
Label Error Displays 0 if the bar code scan was successful, or displays an error condition:
60 –The bar code scanner could not read the bar code label because there was
no label on the cartridge.
62 – The bar code scanner could not read the label because the magazine is not
present.
64 – The bar code scanner could not read the label because the label checksum
is bad.
Element Address The SCSI element address.
Host The SCSI ID of the host that has reserved the element (if it is reserved). If the
element is not reserved, this field is 0.
Reserved Indicates whether the element is reserved by a host.
Reserve ID The ID that the element is reserved under. This is a number assigned by a host
when the reservation was made. If there is no reservation, this field is 0.
SndVol Match
(Send Volume
Match)
The cartridge label matched the template sent with the last SCSI SEND VOLUME
TAG command (1) or did not match (0).
Warning Displays 0 if there are no failures or errors associated with this element, or displays
an error code. See Chapter 8 for a list of error codes and corrective actions.
Table 6-7 Inventory fields (continued)
Field Description