Exabyte 221L, Product Manual

Page: 127 / 208

A
UGUST
2005 E
XABYTE
221L
AND
221L-FC L
IBRARIES 111
V
IEWING
I
NTERFACE
, L
IBRARY
,
AND
T
APE
D
RIVE
I
NFORMATION
3.
3. 3.
3. Click on SCSI information. A page similar to Figure 6-24 appears.
This page indicates whether the library is reserved by a host, and, if the library
is reserved, indicates the host’s SCSI ID. This page also displays element
address, parity, and resource recovery information for the library. These
parameters are equivalent to those reported by the library in response to a
MODE SENSE command issued by the application software. For information
about the MODE SENSE command, refer to the Exabyte 110L, 215, 221L, and
430 SCSI Reference .
For each parameter, the following values are provided:
Saved —The value specified as the power- on default by a MODE SELECT
command. After a saved value has been specified with a MODE SELECT
command, this value takes effect immediately and each time you power on
the library.
Current —The value currently active. It is either the power-on default or a
temporary value set by the latest MODE SELECT command.
Default —The original value set at the factory.
Figure 6-24 Remote management utility – SCSI Interface Information page