Exabyte 221L, Product Manual

Page: 39 / 208

A
UGUST
2005 E
XABYTE
221L
AND
221L-FC L
IBRARIES 23
C
ONNECTING THE
L
IBRARY TO
E
THERNET
(O
PTIONAL
)
To connect the library to Ethernet using the provided cable:
1.
1. 1.
1. Insert one end of the cable into the library’s Ethernet port until you hear it
snap into place. The Ethernet port is located on the back of the library, as
shown in Figure 2-15 .
2. 2. 2. 2. Connect the other end of the cable to the network or directly to the server
you plan to use to monitor the library or upload firmware.
When you perform library configuration, you will configure the library’s
Ethernet interface (see page 38 ).
Figure 2-15 Location of Ethernet port (221L shown)
Ethernet port