Exabyte 221L, Product Manual

Page: 109 / 208

A
UGUST
2005 E
XABYTE
221L
AND
221L-FC L
IBRARIES 93
S
ETTING
C
ONFIGURATION
O
PTIONS
To configure the library’s SCSI interface:
1.
1. 1.
1. Click on Configure at the top of the page.
2.
2. 2.
2. Click on Configure the interfaces.
3.
3. 3.
3. Click on Configure the SCSI interface. A page similar to Figure 6-4 appears.
4. 4. 4. 4. If necessary, enter the remote manager password (see page 105 ).
5. 5. 5. 5. Enter new SCSI IDs for the library, drive 1, and drive 2, as desired.
6. 6. 6. 6. Check or uncheck the Enable parity box.
7. 7. 7. 7. Click on the Change button. The changes take effect.
Configuring the Fibre Channel Interface (221L-FC)
For the 221L-FC, you can set the Fibre Channel Loop IDs for the library and
tape drive(s) and enable or disable hard addressing. See page 34 for
information about Loop IDs and hard addressing.
To configure the library’s Fibre Channel interface:
1. 1. 1. 1. Click on Configure at the top of the page.
2. 2. 2. 2. Click on Configure the interfaces.
Figure 6-4 Remote management utility – SCSI Interface Configuration page