Exabyte 221L, Product Manual

Page: 110 / 208

94
P
RODUCT
M
ANUAL
1014258
C
HAPTER
6—U
SING THE
R
EMOTE
M
ANAGEMENT
U
TILITY
3.
3. 3.
3. Click on Configure the Fibre Channel interface. A page similar to Figure 6-5
appears.
4.
4. 4.
4. If necessary, enter the remote manager password (see page 105 ).
5.
5. 5.
5. Enter new Loop IDs for the library, drive 1, and drive 2, as desired.
6.
6. 6.
6. Check or uncheck the Require hard loop IDs box.
7.
7. 7.
7. Click on the Change button. The changes take effect.
Configuring the Network (Ethernet) Interface
For the library’s network interface, you can set up the network addresses,
specify the SNMP trap recipient address, and change the FTP user name and
password. See page 38 for information about network addresses, SNMP, and
FTP settings.
Setting Up the Network Addresses To set up the library’s network addresses:
1. 1. 1. 1. Click on Configure at the top of the page.
2. 2. 2. 2. Click on Configure the interfaces.
3. 3. 3. 3. Click on Configure the network interface.
4. 4. 4. 4. Click on Set up the network interface. A page similar to Figure 6-6 appears.
Figure 6-5 Remote management utility – Fibre Channel Interface Configuration
page