Exabyte 221L, Product Manual

Page: 87 / 208

A
UGUST
2005 E
XABYTE
221L
AND
221L-FC L
IBRARIES 71
P
ERFORMING
H
ARDWARE
E
XERCISES
7.
7. 7.
7. Press
[ENTER]
. The following screens appear.
8. 8. 8. 8. Use the arrow keys to set the number of moves (the left and right arrow
keys move across the columns; the up and down arrow keys change the
numbers). Then press
[ENTER]
.
9. 9. 9. 9. The library begins the demo and displays status messages. If you want to
stop a demo in progress, press
[ESCAPE]
.
I
SSUING
L
IBRARY
C
OMMANDS
You can use the commands available through the Command Menu to perform
isolated library functions such as positioning the robot or moving a cartridge.
Exercises available through the Command Menu can also be used to
troubleshoot library hardware problems. Refer to the diagram on page 69 for
the element indexes. These numbers correspond to library components and
are necessary for some commands.
To use library commands:
1. 1. 1. 1. If necessary, disable security (see page 50 ).
2. 2. 2. 2. Change the control mode to LCD (see page 54 ).
3. 3. 3. 3. Press
[MENU]
to display the menus. Press the down arrow key until
“Command Menu” appears.
4. 4. 4. 4. Press
[ENTER]
. The LCD displays the first command.
5.
5. 5.
5. Use the up or down arrow keys to select one of the commands (described
in the following table), then press
[ENTER]
.
6. 6. 6. 6. When the command is finished, the screen displays a status message. Press
[ESCAPE]
to return to the Command Menu or to stop a command in progress.
S e t t o t a l d e m o
m o v e s :
0 0 0 0 0 1 0
↕
→
C o m m a n d
M e n u
M o v e
C a r t r i d g e