46
Xe
sar
Sy
st
em
manu
al
2
.0
f
or
v
er
si
on
2
.0
.3
6.1
7
| 2
4.
06
.2
01
5
| mi
spr
int
ing
and
te
chni
cal
c
hange
s
re
se
rv
ed
Please refer to the corresponding data sheet for additional specifications at:
Please note the office mode function (Section:
identification media) and the
different acoustic and visual signals (Section:
Please note that if access components are installed in fire doors, the certificates are
exclusively valid in conjunction with approvals from the corresponding door manu-
facturer.
Please note the following, important notices before use!
Climatic and environmental effects
Note the defined suitability of the handle for the respective ambient conditions as per its IP rating
and specific temperature range.
Do not use the handles in very dusty environments.
Use the handles in environments with a humidity below 90% only.
Clarify the application options with a specialist retailer before installing handles in environments
with a particularly high level of static charges.
Do not use handles in corrosive atmospheres (e.g. chlorine, ammonia, lime water or salt water).
Conditions of use
Ambient tempe5 °C to +50 °C (depending on the battery) | Humidity < 90 %, non-
condensing | For 200,000 cycles as per EN 1906
1
| IP40 protection
Information regarding installation and the correct installation situation
Exclusively specialist personnel must install handles according to the specifications in the assembly
manual enclosed with the product. EVVA shall assume no liability for any kind for damage result-
ing from improper assembly/installation.
Note that the maximum nut correction position of the mortise lock must be 5° to ensure the Xe-
sar handle operates correctly, as otherwise malfunctions cannot be excluded.
Summary of Contents for Xesar 2.0
Page 1: ......
