53
Xe
sar
Sy
st
em
manu
al
2
.0
f
or
v
er
si
on
2
.0
.3
6.1
7
| 2
4.
06
.2
01
5
| mi
spr
int
ing
and
te
chni
cal
c
hange
s
re
se
rv
ed
Climatic and environmental effects
Please note the defined suitability of the lock cylinder for the respective ambient conditions as per
its IP rating and specific temperature range.
Do not use the lock cylinder in very dusty environments.
Use the lock cylinder in environments with a humidity below 90% only.
Clarify the application options with a specialist retailer before installing lock cylinders in environ-
ments with a particularly high level of static charge.
Do not use lock cylinders in corrosive atmospheres (e.g. chlorine, ammonia, lime water or salt wa-
ter).
Information regarding installation and the correct installation situation
Exclusively specialist personnel must install lock cylinders according to the specifications in the
assembly manual which is also enclosed with the product. EVVA shall assume no liability for any
kind for damage resulting from improper assembly/installation.
Check the lock for damage and dirt before assembling/installing the lock cylinder. Please also ob-
serve the instructions of the lock manufacturer prior to assembly/installation. EVVA recommends
using correctly operating mortise locks to safeguard the lock cylinder operates correctly.
All Xesar access components are delivered ex works in so-called construction mode. In this condi-
tion any Construction Card unlocks any Xesar access component. For this reason, immediately
after having installed each Xesar access component ensure it is correctly added to the locking
system so that exclusively authorised persons have access.
Exclusively use accessories and spare parts recommended by EVVA. Mechatronic lock cylinders are
exclusively fully suitable for assembly/installation in locks, escutcheons, etc. if the lock cylinders are
subject to the corresponding dimensional standards and the respective locks, escutcheons, etc. are
exclusively designed to accommodate mechatronic lock cylinders as per said standards. In all other
cases, manufacturers, retailers and users of such locks, escutcheons and similar devices must be
certain that the lock cylinder they select is suitable for installation and its intended use.
Observe the corresponding international and national specifications in the corresponding legisla-
tion, directives, standards and guidelines, particularly regarding the requirements for escape routes
and emergency exits, during project management and installation of the lock cylinders.
Before installing lock cylinders – in particular in metal frame doors – check the installation situa-
tion to prevent injuries (e.g. squashed limbs) or damage to the lock cylinder.
Summary of Contents for Xesar 2.0
Page 1: ......
