205
Xe
sar
Sy
st
em
manu
al
2
.0
f
or
v
er
si
on
2
.0
.3
6.1
7
| 2
4.
06
.2
01
5
| mi
spr
int
ing
and
te
chni
cal
c
hange
s
re
se
rv
ed
Transferring access events using identification media
The most recent access events (access granted, access denied, battery low, etc.) of the door com-
ponent are transferred to identification media as part of every second identification process, e.g.
when a door component is unlocked using identification media.
Note: this process does not require users to be logged in to the software and the Admin Card
must not be in the coding station - it is sufficient to only launch the software.
Transferring blacklist entries using identification media
A blacklist entry represents the information regarding identification media that is blocked in the
software.
Said blacklist entries are written to all identification media using the coding station. Identification
media then distribute the information to all door components.
The memory of one identification medium is sufficient for up to 10 blacklist entries. As soon as
identification media are once again used at the coding station, the software detects to which door
components the blacklist has already been transferred and visualises the corresponding status of
individual doors on the Xesar software dashboard.
We recommend transferring blacklists using the Xesar tablet if more than 10 identification media
are lost/stolen at once.
An identification medium that has been blocked in the software (medium on the blacklist) can be
invalidated/deleted as part of the following:
Expiry date exceeded
Validity period expired
Medium has been in contact with the coding station
Medium attempts to unlock a door at which the blacklist is up to date
Summary of Contents for Xesar 2.0
Page 1: ......
