EVVA Xesar 2.0 System Manual Download Page 180

Page: 180 / 212

180

sar

manu

6.1

| 2

| mi

spr

int

ing

and

chni

cal

hange

Tip:
Collect Xesar identification media or block access. If you block Xesar identification
media, all information on the identification media will be deleted upon updating at
a Xesar coding station. Personal entries remain saved in the database.

Proceed as follows to delete a person:



Select

Persons > Persons



Tick the check box of the person(s) you would like to delete.



Click

Delete person



Click

Delete person

to confirm the security prompt.

Figure 117: Deleting persons

If you have highlighted and deleted several persons and confirm

Delete person

this

will apply to the entire selection.

Summary of Contents for Xesar 2.0





















































































































































































































Search results

Summary of Contents for Xesar 2.0

Reviews:

Related manuals for Xesar 2.0

Brands by name

Popular brands

EVVA Xesar 2.0, System Manual

Search results

Summary of Contents for Xesar 2.0

Reviews:

Related manuals for Xesar 2.0

Brands by name

Popular brands