29
Xe
sar
Sy
st
em
manu
al
2
.0
f
or
v
er
si
on
2
.0
.3
6.1
7
| 2
4.
06
.2
01
5
| mi
spr
int
ing
and
te
chni
cal
c
hange
s
re
se
rv
ed
Automatic office mode (schedule-based)
In addition to manual office mode, Xesar components can also be set to office mode au-
tomatically. In this process, you can set a certain time window in the Xesar software. The
Xesar access component indicates the status change of automatic office mode acoustically
and visually (refer to
Automatic office mode in factory state in conjunction with the Construction Card is not
possible.
When the battery charge reaches a low level, a Battery warning is issued.
In this state, no automatic or manual office opening to be started.
Current permanent openings (automatic / manual), however, can still be closed. In addi-
tion, a clear log entry is applied to indicate not started automatic continuous openings.
DeleteKey function
The blacklist (= list of all blocked media within a system) is transmitted to each
Xesar access component upon updating. If a medium on the blacklist is used at a
door component, the access component deletes it, regardless of whether or not it
was authorised for the respective door.
Caution:
Manual and automatic office mode are equivalent with regard to authorisations. For
this reason, users with appropriate authorisations can manually suspend or reacti-
vate automatic office mode. Manual office mode can also be deactivated by sched-
ule-based, automatic office mode, providing this has been configured accordingly
in the software.
Summary of Contents for Xesar 2.0
Page 1: ......
