Evolis AV1H0000BD, Service Manual

Page: 93 / 293

Service Manual_AVA1_ENG-20220922_I 93
Printer Setup >
Parallel Print Overview ON/OFF of the parallel process function for multiple cards
Detail To set ON/OFF of the parallel process function for multiple cards.
ON: Perform the parallel processing (continuous printing). Print up
to 2 cards at once through parallel processing in the printer.
OFF: Do not perform the parallel processing (prints one card at a
time). Do not print another
card until the previous card finishes printing (normal eject).
Adj/Set/Operate
Method
Select the setting value.
Press the SET key, and then confirm the setting value.
Caution Set this item according to the specification of the card printing
system.
Adj/Set/Operate
Method
ON OFF
Default Value ON
Detail
Displays the high temperature heating cumulative time of the heat
roller at 125 deg C or higher.
Adj/Set/Operate
Method
N/A (Display only)
Unit min.
Error
Management
Overview Sets the error card reissue function
Detail Sets the error card reissue function
OFF: If an error occurs when issuing the card, discards the job.
ON: If an error occurs when issuing the card, maintains the job.
Reissues after restoring the error state.
Adj/Set/Operate
Method
Select the setting value.
Press the SET key, and then confirm the setting value.
Display/Adj/Set
Range
OFF ON
Default Value OFF
Peel Mode
Peel Mode
Overview Sets the peeling operation during primary transfer
Detail Sets the peeling operation during primary transfer.
NORMAL: Performs the peeling operation to a position 5 mm
beyond the peeling point of the ribbon and film.
HIGH DUTY: Performs the peeling operation to a position 15 mm
beyond the peeling point of the ribbon and film. Use when the
ribbon tends to break easily, such as con-
tinuously issuing high density data.
Peel Mode Adj/Set/Operate
Method
Select the setting value.
Press the SET key, and then confirm the setting value.
Display/Adj/Set
Range
NORMAL HIGH DUTY
Default Value NORMAL
Print Quality Bk Overview Sets the high-quality mode for black
Detail Sets the high-quality mode for black
OFF: Transfers both color and black at the same speed.
ON: Reduces the transfer speed during black transfer.
Adj/Set/Operate
Method
Select the setting value.
Press the SET key, and then confirm the setting value.
Display/Adj/Set
Range
OFF ON
Default Value OFF