Evolis AV1H0000BD, Service Manual

Page: 58 / 293

Service Manual_AVA1_ENG-20220922_I 58
Error Code Item Description
43-XX Error Message Call Tech Support
Outline Decurl assembly lift operation error
Detection Description Lift operation error of the decurl assembly was detected.
Remedy
[Related parts]
•
Harnesses from the Decurl Assembly Position Sensor ( SN19 ) to the
Main board
• Harnesses from the Decurl Assembly Drive Motor ( DM7 ) to the Main
board
• Decurl Assembly Position Sensor ( SN19 )
• Decurl Assembly Drive Motor ( DM7 )
• Main board
[Remedy]
1. Check the reaction of the Decurl Assembly Position Sensor ( SN19 ) in
the sensor check mode of the service mode (page 27 )
.
2. Check/replace the related harness/cable, connector and parts.
50-XX Error Message Mag: Write Error
Outline Magnetic data writing error
Detection Description The writing of the magnetic data failed.
Remedy
[Related parts]
• Magnetic R/W Unit
[Remedy]
1.
Check the setting direction of the magnetic card in the card case.
2.
Check the magnetic card specifications.
⋅
ISO or JIS2
⋅
Hi-Co or Lo-Co
3. Check/replace the related harness/cable, connector and parts.
51-XX Error Message Mag: Read Error
Outline Magnetic data reading error
Detection Description The reading of the magnetic data failed.
Remedy
[Related parts]
• Magnetic R/W Unit
[Remedy]
1.
Check the setting direction of the magnetic card in the card case.
2.
Check the magnetic card specifications.
⋅
ISO or JIS2
⋅
Hi-Co or Lo-Co
3. Check/replace the related harness/cable, connector and parts.
52-XX Error Message Call Tech Support
Outline Magnetic R/W unit communication error
Detection Description The program error was detected.
Remedy
[Related parts]
• Magnetic R/W Unit
[Remedy]
1.
Turn OFF/ON the power switch.
2.
If this error occurs routinely, contact to the sales company.
53-XX Error Message Call Tech Support
Outline Magnetic R/W unit communication error
Detection Description Communication error between the printer and the magnetic R/W unit was
detected.
Remedy [Related parts]
• Harnesses from the Magnetic R/W Unit to the Main board
•
Magnetic R/W Unit
•
Main board
[Remedy]
1.
Check/replace the related harness/cable, connector and parts.