Evolis AV1H0000BD, Service Manual

Page: 89 / 293

Service Manual_AVA1_ENG-20220922_I 89
DM6: Heat
Action Check > DM6: Heat >
DM6: Up Overview Operation check of the Heat Roller Lift Motor (DM6) (move up)
Detail To operate the Heat Roller Lift Motor (DM6) for the specified period of
time (1 to 20 seconds). The nip mechanism of the heat roller and
stripping shaft is moved to the upper position.
Use Case Checking the operation
Adj/Set/Operate
Method
Select the item, and then press SET key.
Caution Because the printer becomes operation failure, do not press the SET
key to stop during operation. If it has been stopped, turn OFF/ON the
power switch.
DM6: Home Overview Operation check of the Heat Roller Lift Motor (DM6) (home position)
Detail To operate the Heat Roller Lift Motor (DM6) for the specified period of
time (1 to 20 seconds). The nip mechanism of the heat roller and
stripping shaft is moved to the home position.
Use Case Checking the operation
Adj/Set/Operate
Method
Select the item, and then press SET key.
Caution Because the printer becomes operation failure, do not press the SET
key to stop during oper ation. If it has been stopped, turn OFF/ON the
power switch.
DM6: Down Overview Operation check of the Heat Roller Lift Motor (DM6) (move down)
Detail To operate the Heat Roller Lift Motor (DM6) for the specified period of
time (1 to 20 seconds). The nip mechanism of the heat roller and
stripping shaft is moved to the lower position.
Use Case Checking the operation
Adj/Set/Operate
Method
Select the item, and then press SET key.
Caution Because the printer becomes operation failure, do not press the SET
key to stop during oper ation. If it has been stopped, turn OFF/ON the
power switch.
DM7: Decurl
Action Check > DM7: Decurl >
DM7: Up Overview Operation check of the Decurl Assembly Drive Motor (DM7) (move up)
Detail To operate the Decurl Assembly Drive Motor (DM7) for the specified
period of time (1 to 20 seconds).
The decurl mechanism is moved to the upper position.
Use Case Checking the operation
Adj/Set/Operate
Method
Select the item, and then press SET key.
DM7: Up Caution Perform the checks without having a card in the printer.
Because the printer becomes operation failure, do not press the SET
key to stop during operation. If it has been stopped, turn OFF/ON the
power switch.
DM7:
Down
Overview Operation check of the Decurl Assembly Drive Motor (DM7) (move
down)
Detail To operate the Decurl Assembly Drive Motor (DM7) for the specified
period of time (1 to 20 seconds).
The decurl mechanism is moved to the lower position.
Use Case Checking the operation
Adj/Set/Operate
Method
Select the item, and then press SET key.
Caution Perform the checks without having a card in the printer.
Because the printer becomes operation failure, do not press the SET
key to stop during operation. If it has been stopped, turn OFF/ON the
power switch.