Evolis AV1H0000BD, Service Manual

Page: 41 / 293

Service Manual_AVA1_ENG-20220922_I 41
Error Code Item Description
18-01 Error Message No Film
Outline Transfer film empty error (during initialization)
Detection Description The printer detected the transfer film empty during initialization.
Remedy
[Related parts]
•
Harnesses from the Film Beginning Sensor 2 ( SN13 ) to the Main board
•
Film Beginning Sensor 2 ( SN13 )
•
Main board
[Remedy]
1. Check that the ink ribbon and transfer film are properly set.
2. Execute the sensor automatic adjustment in the sensor check mode
of the service mode (page 27 ).
3. Check/replace the related harness/cable, connector and parts.
18-02 Error Message No Film
Outline Transfer film empty error (during transfer operation)
Detection Description The printer detected the transfer film empty during initialization.
Remedy
[Related parts]
• Harnesses from the Film Beginning Sensor 2 ( SN13 ) to the Main board
•
Film Beginning Sensor 2 ( SN13 )
•
Main board
[Remedy]
1. Check that the ink ribbon and transfer film are properly set.
2. Execute the sensor automatic adjustment in the sensor check mode
of the service mode (page 27 ).
3. Check/replace the related harness/cable, connector and parts.
18-03 Error Message No Film
Outline Transfer film empty error
Detection Description The printer detected the transfer film empty.
Remedy
[Related parts]
• Harnesses from the Film Beginning Sensor 2 ( SN13 ) to the Main board
• Film Beginning Sensor 2 ( SN13 )
• Main board
[Remedy]
1. Check that the ink ribbon and transfer film are properly set.
2. Execute the sensor automatic adjustment in the sensor check mode
of the service mode (page 27 ).
3. Check/replace the related harness/cable, connector and parts.
19-01
19-02
Error Message Film Wind up.
Outline Transfer film wind up speed error (wind up axis)
Detection Description The printer detected the wind-up speed error of the transfer film.
Remedy
[Related parts]
•
Transfer Film Cassette
•
Harnesses from the Film Feed Length Sensor (Wind Up Axis)
(SN14)/Film Supply Motor ( DM4 ) to the Main board
•
Film Feed Length Sensor (Wind Up Axis) ( SN14 )/Film Supply Motor
( DM4 )
• Main board
[Remedy]
1. Check the following items of the transfer film cassette.
⋅
There is no damage in the transfer film cassette.
⋅
There is no breakage or improper winding of the transfer film.
⋅
It is not empty.
⋅
The transfer film is properly set.
2. Check the reaction of the Film Feed Length Sensor (Wind Up Axis)
( SN14 ) in the sensor check mode of the service mode (page 27 ).
3. Check the reaction of the Film Supply Motor ( DM4 ) in the action check
mode of the service mode. If it is operating properly, clean the
transfer film feed roller.
4. Check/replace the related harness/cable, connector and parts.