Evolis AV1H0000BD, Service Manual

Page: 82 / 293

Service Manual_AVA1_ENG-20220922_I 82
Sensor Check >
SN21-SN26 Display/Adj/Set
Range
The sensor level is displayed on the 2nd line of the LCD in turn from
the left end.
bit Parts Name No. Status
5 [Not used] SN21 1: Block light
4 [Not used] SN22 1: Block light
3 Card Sensor (Ejection Assembly
Right)
SN23 1: Block light
2 Card Sensor (Cleaning
Assembly Inlet)
SN24 1: Block light
1 Heat Roller Position Sensor 2 SN25 1: Block light
0 [Not used] SN26 1: Block light
FAN1-FAN4/
Cover Overview Level indications for fans (FAN1 - FAN4) and Front Cover Switch (MS1)
Detail Level indications for fans (FAN1 - FAN4) and Front Cover Switch (MS1)
Use Case At error occurrence
Adj/Set/Operate
Meth od
Select the item, and then press SET key.
Display/Adj/Set
Range
The fan/switch level is displayed on the 2nd line of the LCD in turn
from the left end.
bit Parts Name No. Status
4 Printhead Cooling Fan FAN1 0: Stop or error
3 Power Supply PCB Cooling Fan FAN2 0: Stop or error
2 Heat Roller Cooling Fan FAN3 0: Stop or error
1 Transfer Film Cooling Fan FAN4 0: Stop or error
0 Front Cover Switch MS1 0: Stop or error
Auto
Adjustment Caution
Perform the adjustment after removing the ink ribbon cassette and
the transfer film cassette. See Cassette Handling Good Practices
Overview
Automatic sensor adjustment (SN9/12/13)
Automatically adjustment of duty control of the DC motors (DM1 to
DM4)
Detail
To adjust the luminescence of sensors (SN9/12/13) automatically.
Detect the rotation speed of DC Motors (DM1 - DM4) and correct the
duty control at the feed operation automatically.
Adj/Set/Operate
Method
Select the item, and then press SET key.