Evolis AV1H0000BD, Service Manual

Page: 57 / 293

Service Manual_AVA1_ENG-20220922_I 57
Code 40-XX to BF-01
Error Code Item Description
40-XX Error Message Call Tech Support
Outline Reverse assembly rotation operation error
Detection Description Rotation operation error of the reverse assembly was detected.
Remedy
[Related parts]
• Harnesses from the Reverse Assembly Position Sensor 1 ( SN7 ) to the
Main board
•
Harnesses from the Reverse Assembly Position Sensor 2 ( SN8 ) to the
Main board
• Harnesses from the Reverse Assembly Rotation Motor ( PM3 ) to the
Main board
• Reverse Assembly Position Sensor 1 ( SN7 )
•
Reverse Assembly Position Sensor 2 ( SN8 )
• Reverse Assembly Rotation Motor ( PM3 )
• Main board
[Remedy]
1.
Check the reaction of the Reverse Assembly Position Sensor 1 ( SN7 )
and the Re verse Assembly Position Sensor 2 ( SN8 ) in the sensor
check mode of the service mode (page 27 ) .
2.
Check/replace the related harness/cable, connector and parts.
41-XX Error Message Call Tech Support
Outline Primary transfer feed roller lift operation error
Detection Description Lift operation error of the primary transfer feed roller was detected.
Remedy
[Related parts]
•
Harnesses from the Platen Position Sensor 1 ( SN16 ) to the Main board
•
Harnesses from the Platen Position Sensor 2 ( SN17 ) to the Main board
•
Harnesses from the Platen Lift Motor ( DM5 ) to the Main board
•
Platen Position Sensor 1 ( SN16 )
•
Platen Position Sensor 2 ( SN17 )
•
Platen Lift Motor ( DM5 )
•
Main board
[Remedy]
1.
Check the reaction of the Platen Position Sensor 1 ( SN16 ) and the
Platen Position Sensor 2 ( SN17 ) in the sensor check mode of the
service mode (page 27 )
.
2.
Check/replace the related harness/cable, connector and parts.
42-XX Error Message Call Tech Support
Outline Heat roller lift operation error
Detection Description Lift operation error of the heat roller was detected.
Remedy
[Related parts]
•
Harnesses from the Heat Roller Position Sensor 1 ( SN18 ) to the Main
board
•
Harnesses from the Heat Roller Position Sensor 2 ( SN25 ) to the Main
board
•
Harnesses from the Heat Roller Lift Motor ( DM6 ) to the Main board
•
Heat Roller Position Sensor 1 ( SN18 )
•
Heat Roller Position Sensor 2 ( SN25 )
•
Heat Roller Lift Motor ( DM6 )
•
Main board
[Remedy]
1.
Check the reaction of the Heat Roller Position Sensor 1 ( SN18 ) and the
Heat Roller Position Sensor 2 ( SN25 ) in the sensor check mode of the
service mode (page 27 )
.
2.
Check/replace the related harness/cable, connector and parts.