Evolis AV1H0000BD, Service Manual

Page: 86 / 293

Service Manual_AVA1_ENG-20220922_I 86
DM1&DM2: Ink
Action Check > DM1&DM2 : Ink >
Low:
Forward
Overview
Low speed operation check of the Ribbon Wind Up Motor
(DM1)/Ribbon Supply Motor (DM2) (feed direction)
Detail
To operate the Ribbon Wind Up Motor (DM1) and Ribbon Supply
Motor (DM2) for the specified period of time (1 to 20 seconds) to the
feed direction.
Use Case Checking the operation
Adj/Set/Operate
Meth- od
Select the item, and then press SET key.
Caution
Because the printer becomes operation failure, do not press the
SET key to stop during oper ation. If it has been stopped, turn
OFF/ON the power switch.
Supplement/Memo The motor control for the primary transfer is performed.
Low:
Reverse
Overview
Low speed operation check of the Ribbon Wind Up Motor
(DM1)/Ribbon Supply Motor (DM2) (reverse direction)
Detail
To operate the Ribbon Wind Up Motor (DM1) and Ribbon Supply
Motor (DM2) for the specified period of time (1 to 20 seconds) to the
reverse direction.
Use Case Checking the operation
Adj/Set/Operate
Meth od
Select the item, and then press SET key.
Caution
Because the printer becomes operation failure, do not press the
SET key to stop during operation. If it has been stopped, turn
OFF/ON the power switch.
Supplement/Memo The motor control for the primary transfer is performed.
High:
Forward
Overview
High speed operation check of the Ribbon Wind Up Motor
(DM1)/Ribbon Supply Motor (DM2) (feed direction)
Detail
To operate the Ribbon Wind Up Motor (DM1) and Ribbon Supply
Motor (DM2) for the specified period of time (1 to 20 seconds) to the
feed direction.
Use Case Checking the operation
Adj/Set/Operate
Method
Select the item, and then press SET key.
Caution
Because the printer becomes operation failure, do not press the
SET key to stop during oper ation. If it has been stopped, turn
OFF/ON the power switch.
Supplement/Memo The motor control for the normal feed is performed.
High:
Reverse
Overview
High speed operation check of the Ribbon Wind Up Motor
(DM1)/Ribbon Supply Motor (DM2) (reverse direction)
Detail
To operate the Ribbon Wind Up Motor (DM1) and Ribbon Supply
Motor (DM2) for the specified period of time (1 to 20 seconds) to the
reverse direction.
Use Case
Checking the operation
Adj/Set/Operate
Method
Select the item, and then press SET key.
Caution
Because the printer becomes operation failure, do not press the
SET key to stop during operation. If it has been stopped, turn
OFF/ON the power switch.
Supplement/Memo The motor control for the normal feed is performed.