Evolis AV1H0000BD Service Manual Download Page 269

Page: 269 / 293

Service Manual_AVA1_ENG-20220922_I

269

•

Print color in grayscale

When selected, this option will convert all colors in grayscale.

⋅

Grayscale (CMY)
Colour data is converted in grayscale and printed with YMC panels.

⋅

Black(K)
Colour data is converted in grayscale and printed with K panel.

•

BLACK printing only

When selected, this option will enforce use of black (K) panel only.

•

Threshold
Binary Conversion by Fixed value (128 gradation).

•

Pattern dithering
Binary conversion by dithering pattern.

•

Error diffusion
Binary Conversion by Error diffusion.

•

Custom
Algorithm to convert Binary data from output data of Application by Attribute of data is

selectable. Click (Custom) for Setting and display Custom Setting Menu.

Summary of Contents for AV1H0000BD






































































































































































































































































































Search results

Summary of Contents for AV1H0000BD

Reviews:

Related manuals for AV1H0000BD

Brands by name

Popular brands

Evolis AV1H0000BD, Service Manual

Search results

Summary of Contents for AV1H0000BD

Reviews:

Related manuals for AV1H0000BD

Brands by name

Popular brands