Evolis AV1H0000BD, Service Manual

Page: 52 / 293

Service Manual_AVA1_ENG-20220922_I 52
Error Code Item Description
34-XX Error Message Card Jam Print
Outline Secondary transfer assembly card jam error
Detection Description The printer detected a card jam at the Card Edging Sensor (Secondary
Transfer Assembly) ( SN5 ) and the Card Sensor (Ejection Assembly Left) ( SN6 ).
Remedy [Related parts]
• Harnesses from the Card Edging Sensor (Secondary Transfer
Assembly) (
SN5
) to the Main board
•
Harnesses from the Card Sensor (Ejection Assembly Left) (
SN6
) to the
Main board
•
Harnesses from the Card Feed Motor (Secondary Transfer Assembly)
(
HB1
) to the Main board
• Card Edging Sensor (Secondary Transfer Assembly) (
SN5
)
• Card Sensor (Ejection Assembly Left) (
SN6
)
• Card Feed Motor (Secondary Transfer Assembly) ( HB1 )
• Main board
[Remedy]
1. Check the reaction of the Card Edging Sensor (Secondary Transfer
Assembly) (
SN5
) and the Card Sensor (Ejection Assembly Left) (
SN6
) in
the sensor check mode of the service mode (page 27 ) .
2.
Check the reaction of the Card Feed Motor (Secondary Transfer
Assembly) (
HB1
) in the action check mode of the service mode (page
27 )
.
If it is operating properly, clean the card feed roller.
3.
Check/replace the related harness/cable, connector and parts.
35-XX Error Message Card Jam Print
Outline Secondary transfer assembly card jam error
Detection Description The printer detected a card jam at the Card Edging Sensor (Secondary
Transfer Assembly) (
SN5
) during secondary transfer operation.
Remedy [Related parts]
•
Harnesses from the Card Edging Sensor (Secondary Transfer
Assembly) (
SN5
) to the Main board
•
Harnesses from the Card Feed Motor (Secondary Transfer Assembly)
(
HB1
) to the Main board
• Card Edging Sensor (Secondary Transfer Assembly) (
SN5
)
• Card Feed Motor (Secondary Transfer Assembly) ( HB1 )
• Main board
[Remedy]
1. Check the following items of the transfer film cassette.
⋅
There is no damage in the transfer film cassette.
⋅
There is no breakage or improper winding of the transfer film.
⋅
It is not empty.
⋅
The transfer film is properly set.
2.
Check the reaction of the Card Edging Sensor (Secondary Transfer
Assembly) (
SN5
) in the sensor check mode of the service mode (page
27 )
.
Check the reaction of the Card Feed Motor (Secondary Transfer
Assembly) (
HB1
) in the action check mode of the service mode (page
27 )
.
If it is operating properly, clean the card feed roller.
3.
Check/replace the related harness/cable, connector and parts.