Evolis AV1H0000BD, Service Manual

Page: 92 / 293

Service Manual_AVA1_ENG-20220922_I 92
Printer Setup >
Parallel Print Overview ON/OFF of the parallel process function for multiple cards
Detail To set ON/OFF of the parallel process function for multiple cards.
ON: Perform the parallel processing (continuous printing). Print up
to 2 cards at once through parallel processing in the printer.
OFF: Do not perform the parallel processing (prints one card at a
time). Do not print another
card until the previous card finishes printing (normal eject).
Adj/Set/Operate
Method
Select the setting value.
Press the SET key, and then confirm the setting value.
Caution Set this item according to the specification of the card printing
system.
Adj/Set/Operate
Method
ON OFF
Default Value ON
Short Size Print Overview ON/OFF of the partial printing of color data
Detail To set ON/OFF of the card empty detection when waiting
OFF: Always print (temporary transfer) on the entire surface of card
ON: Perform the partial printing (primary transfer) on the effective
area (region with data other than 0 tone) only within color data. The
design or layout of the color data may reduce the time required to
print the cards.
Adj/Set/Operate
Method
Select the setting value.
Press the SET key, and then confirm the setting value.
Short Size Print Display/Adj/Set
Range
ON OFF
Default Value OFF
Initialize Mode Overview Set of the initializing actions
Detail RENEW: Initializes when turning on the power and clearing errors.
Updates the ink ribbon and transfer film (*1).
BEFORE PRINTING: Initializes when printing the first time after
turning on the power. Does not initialize when turning on the power
or clearing errors.
NORMAL: Initializes when turning on the power and clearing errors.
Does not update the ink ribbon and transfer film.
*1: Discards a specified amount of ink ribbon and transfer film every
third initialization operation and uses a new area.
Adj/Set/Operate
Method
Select the setting value.
Press the SET key, and then confirm the setting value.
Display/Adj/Set
Range
RENEW BEFORE PRINTING NORMAL
Default Value RENEW
Language Overview Language setting for displaying error messages and user mode
menu on the LCD screen
Detail Sets the language to be used for displaying error messages and for
the user mode menu on the LCD screen.
Adj/Set/Operate
Method
Select the setting value.
Press the SET key, and then confirm the setting value.
Display/Adj/Set
Range
ENGLISH CHINESE
Default Value ENGLISH
Revision Check Overview Moves to the setting menu of the printer configuration (revision)
Adj/Set/Operate
Method
Select the item, and then press SET key.
Display/Adj/Set
Range
Revision
Rbn Back Tension Ribbn Tension Platen Nip Duty Thermister
Heat Roller FilmTension(1st)
Gensokuhi Dm2
Heating Time Overview Display of heat roller high temperature heating time