Evolis AV1H0000BD, Service Manual

Page: 79 / 293

Service Manual_AVA1_ENG-20220922_I 79
SENSORS / MOTORS/ FANS/SWITCHES FONCTION LIST
Part Part Description Location Function
SN1 Card sensor Card feed (feeder) Detection of card empty
SN2 Card Sensor (Cleaning
Assembly Outlet)
Card feed (flip turn)
Detection of the card (flip: cleaning
position)
SN3 Card Sensor (Reverse
Assembly Outlet)
Detection of the card (Flip section
position)
SN4 Card Sensor (Magnetic R/W) Detection of the card (Magnetic Option
position)
SN5 Card Edging Sensor
(Secondary Transfer
Assembly)
Card feed (secondary
transfer)
Detection of the edge of the card
(Secondary transfer position)
SN6 Card Sensor (Ejection
Assembly Left)
Detection of the card (Transporting cards
position)
SN7 Reverse Assembly Position
Sensor 1
Card flip
Detection of the flip section position
SN8 Reverse Assembly Position
Sensor 2
Detection of the flip section position
SN9 Ribbon Beginning Sensor
Ink ribbon
Detection of the beginning of the ribbon
(ink ribbon mark)
SN10 Ribbon Feed Length Sensor
(Wind Up Axis)
Detection of the ribbon transport length
(used ribbon axis, DM1 pulses)
SN11 Ribbon Feed Length Sensor
(Supply Axis)
Detection of the ribbon transport length
(new ribbon axis, included in DM2)
SN12 Film Beginning Sensor 1
Transfer film
Detection of the beginning of the film
（
1/2, transfer film mark
）
SN13 Film Beginning Sensor 2 Detection of the beginning of the film
（
2/2, transfer film mark
）
SN14 Film Feed Length Sensor
(Supply Axis)
Detection of the film transport length
(new film axis, included in DM4)
SN15 Film Feed Length Sensor
(Wind Up Axis)
Detection of the film transport length
(used film axis, DM3 pulse)
SN16 Platen Position Sensor 1
Thermal head
Detection of the platen position
（
1/2
）
SN17 Platen Position Sensor 2 Detection of the platen position
（
2/2
）
SN18 Heat Roller Position Sensor 1 Heat roller
Detection of the heat roller position
（
1/2
）
SN19 Decurl Assembly Position
Sensor
Decurl
Detection of the de-curl position
SN20 Detection of the card
Card feed (flip turn)
Detection of the card (Only when the
option box is installed)
SN21 Detection of the edge of the
film
Only if the hologram
sensor is installed
Detection of the edge of the film
(hologram sensor)
SN22 Detection of the edge of the
film
Detection of the edge of the film (Only the
hologram sensor is installed)
SN23 Card Sensor (Ejection
Assembly Right)
Card feed (flip turn)
Detection of the card (Reject position)
SN24 Card Sensor (Cleaning
Assembly Inlet)
Card feed (feeder)
Detection of the card (Flip section
position)
SN25 Heat Roller Position Sensor 2 Heat roller Detection of the heat roller position
（
2/2
）
SN26 Detection of the card Card feed (flip turn) Detection of the card (Only when the
contact IC R/W is installed)
MS1 Front Cover Switch Else Detection of open/close of the front
access cover (interlocking function)