Instruction Manual MM850432 ed. 05
75
CD-ROM
drive
Microsoft mouse or a compatible one
In order to install the program, follow the below procedure:
Insert the disk in a CD-ROM drive;
From the Windows Start Menu, select
<RUN…>
;
Enter the filename D:SETUP.EXE (eventually, substitute the letter “D” for the disk drive that contains disk)
Follow the on screen instructions
Once installed, an icon appears in your Windows programs list.
•
Connect the MicroCal to a PC through the serial cable
After executing the program, you can see a menu like that:
Firstly, set up the serial port properly through
Option
menu. Usually, on the back of PC, you can see COM1 and COM2 ports; be sure that the connection port is the same in the
program.
ATTENTION
S
ET THE SAME COMMUNICATION RATE
(
IN
B
AUD
)
BOTH ON
PC
AND ON YOUR INSTRUMENT
Always in Option menu it is eventually possible to set up the communication language.
Next paragraphs illustrate LogMan and LinMan softwares.
