Instruction Manual MM850432 ed. 05c
2
INTRODUCTORY NOTE
A
TTENTION
:
T
HIS MANUAL MUST BE REFERRED TO INSTRUMENTS WITH SERIAL NUMBER
62768
AND
F
IRMWARE VERSION
6.018
ONWARDS
.
This manual has been with all the information you need to install, operate and maintain the two channels multifunction Calibrators
MicroCal 20
series and its accessories.
Eurotron
has used the best care and efforts in preparing this book and believes the information in this publication are accurate. The
Eurotron
products are subjected to continuous improvement, in order to pursue the technological leadership; these improvements could require changes to
the information of this book.
Eurotron
reserves the right to change such information without notice.
No part of this document may be stored in a retrieval system, or transmitted in any form, electronic or mechanical, without prior written permission
of
Eurotron
Instruments S.p.A.
MicroCal 20 DPC
Calibrator uses sophisticated analogic and digital technologies. Any maintenance operation must be carried out by qualified
personnel
ONLY
.
Eurotron
supplies instructions and operative procedures for any operation on the instrument. We recommend to contact our
technicians for any support requirements.
MicroCal 20 DPC
is fully tested in conformity with the directive n°89/336/CEE Electromagnetic Compatibility.
Eurotron
shall not be liable in any
event, technical and publishing error or omissions, for any incidental and consequential damages, in connection with, or arising out of the use of
this book.
All right reserved
Copyright © 2004, 2008
EUROPEAN Headquarters
Eurotron Instruments SpA
Viale F.lli Casiraghi 409/413
20099 Sesto S. Giovanni (MI)
Tel. : +39-02 24 88 201
FAX: +39-02 24 40 286
Mail: [email protected]
USA Headquarters
E-Instruments Group LLC
172 Middletown Blvd – Suite B201
Langhorne, PA 19047
Tel.: 215 750 1212
FAX: 215 750 1399
Mail: [email protected]
