Essilor Pro-E 600 edger User Manual Download Page 96

Page: 96 / 198

The edging screen for the second lens is displayed. All finishes chosen and the modifications made

are kept.

If the test is not mounted correctly in the frame, go to Essibox to modify the shape.

c. Modify the shape on Essibox

If the test lens cannot be mounted, we advise you to modify the shape on Essibox.

Contact your customer support if the job is not available in the job manager on Essibox.

In the job manager screen on Essibox, press the “ID number” to select the job.

The following screen is displayed:

Pro-E 600_Pro-E 700 > v1 -10.18

SER

ANUAL

> II. E

DGING

LENS

Summary of Contents for Pro-E 600 edger







































































































































































































Search results

Summary of Contents for Pro-E 600 edger

Reviews:

Related manuals for Pro-E 600 edger

Brands by name

Popular brands

Essilor Pro-E 600 edger, User Manual

Search results

Summary of Contents for Pro-E 600 edger

Reviews:

Related manuals for Pro-E 600 edger

Brands by name

Popular brands