Essilor Pro-E 600 edger User Manual Download Page 169

Page: 169 / 198

From your edger work screen, you can also select

The following screen will appear:

Press

to select the step bevel wheel: CX3834.

Press

to confirm the tool.

The GMD module moves to facilitate the operation.

Press

to receive more image information about the tool assembly/dismantling procedure.

Press

to cancel the action.

The following message appears: remove the chamfering wheel and replace it with the step wheel.

Position the blocking key on the back axle of the chamfering wheel, and insert the Allen key into the

screw at the center of the wheel and unscrew (towards yourself) the wheel, using the Allen key.

SER

ANUAL

> V. M

AINTENANCE

SERVICING

169

Pro-E 600_Pro-E 700 > v1 -10.18

Summary of Contents for Pro-E 600 edger







































































































































































































Search results

Summary of Contents for Pro-E 600 edger

Reviews:

Related manuals for Pro-E 600 edger

Brands by name

Popular brands

Essilor Pro-E 600 edger, User Manual

Search results

Summary of Contents for Pro-E 600 edger

Reviews:

Related manuals for Pro-E 600 edger

Brands by name

Popular brands