Essilor Pro-E 600 edger, User Manual

Page: 54 / 198

Press .
The edging cycle starts.
When the edging cycle is finished, the retouch screen is displayed.
Press to release the lens.
If necessary, retouch the lens.
Otherwise, start edging the second lens. Select the lens directly on the screen, on the left or right of the
work area.
The edging screen for the second lens is displayed. All finishes chosen and the modifications made
are kept.
d. Modifying the groove curve
Once you have configured the desired type of customized groove, you can complete your customization by
moving the groove curve towards the front or rear surface of the lens so it takes on its shape.
Press from the customized groove finish screen.
You will access the trajectory modification screen.
Press to select the general modification of the groove curve.
Use the buttons and to move the groove curve.
• Press to move the curve towards the front surface of the lens.
• Press to move the curve towards the rear surface of the lens.
The curve cannot be moved more than the minimum distance between the front and rear surfaces
observed on the groove before the modification.
The position of the groove as well as the distances between the center of the groove and the front &
rear surfaces of the lens are displayed in the zoom window.
Press the “cycle start” button (front face) or .
The edging cycle starts.
>
>
>
>
>
>
9
10
11
1
2
3
4
Pro-E 600_Pro-E 700 > v1 -10.18
54
U
SER
M
ANUAL
> II. E
DGING A LENS